;==========================================================
; GSD-File  for Delta PD-01
; 
; Auto_Baud_supp, 12MBaud 
;
; Stand : 
; File    : deltpd01.GSD
;===========================================================

#Profibus_DP

; Unit-Definition-List:

GSD_Revision        = 1
Vendor_Name         = "Delta Electronics"
Model_Name          = "VFD DRIVES"
Revision            = "Rev. 1"
Ident_Number        = 0x08DB
Protocol_Ident      = 0		; PROFIBUS DP
Station_Type        = 0		; DP-slave
FMS_supp            = 0
Hardware_Release    = "V1.0"
Software_Release    = "V1.0"
Redundancy          = 0
Repeater_Ctrl_Sig   = 2		; TTL
24V_Pins            = 0
Implementation_Type = "SPC3"
Bitmap_Device       = "VFDDRV"
Bitmap_Diag         = "VFDDRV"
Bitmap_SF           = "VFDDRV"
Slave_Family        = 1@TdF@Delta VFD Drives	; Drives family

; Supported Communication Speeds:

Auto_Baud_supp      = 1
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800


; DP_Slave Information:

Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 1		; 100 micro-second

; Module-Definitions:

Modular_Station     = 1		; 0-compact; 1-modular
Max_Module          = 1
Max_Input_Len       = 32
Max_Output_Len      = 32
Max_Data_Len        = 64

Modul_Offset        = 0
Fail_Safe           = 0
Max_Diag_Data_Len   = 16
ORDERNUMBER="PD-01"


;specify the user parameters:

 
Max_User_Prm_Data_Len      = 26
User_Prm_Data_Len  	   = 26
User_Prm_Data 		   = 0x20,0x00,\
                             0x20,0x01,\
                             0x00,0x00,\
                             0x00,0x00,\
                             0x21,0x01,\
                             0x21,0x02,\
                             0x21,0x03,\
                             0x21,0x04,\
                             0x00,0x01,\
                             0x00,0x02,\
                             0x00,0x02,\
                             0x00,0x01,\
                             0x00,0x00

Module = "4 PKW,  2 PZD  (PPO 1)        " 0xF3, 0xF1
EndModule
Module = "0 PKW,  2 PZD  (PPO 3)        " 0x00, 0xF1
EndModule
Module = "4 PKW,  4 PZD                 " 0xF3, 0xF3
EndModule
Module = "0 PKW,  4 PZD                 " 0x00, 0xF3
EndModule

; Extended Description of User-Parameters

PrmText = 1
Text(0) = "Address discontinuous"
Text(1) = "Address continue"
EndPrmText

PrmText = 2
Text(0) = "Ignore and Continue"
Text(1) = "Stop accord to Pr.STOP METHOD"
EndPrmText

PrmText = 3
Text(0) = "Stop DataExchange & Report Fault"
Text(1) = "Continue & Report Alarm"
Text(2) = "Ignore & Continue DataExchange"
EndPrmText

ExtUserPrmData = 1 "Data Input 1(PD-01 -> VFD)"
Unsigned16 0x2000 0-65535
EndExtUserPrmData

ExtUserPrmData = 2 "Data Input 2"
Unsigned16 0x2001 0-65535
EndExtUserPrmData

ExtUserPrmData = 3 "Data Input 3"
Unsigned16 0x0000 0-65535
EndExtUserPrmData

ExtUserPrmData = 4 "Data Input 4"
Unsigned16 0x0000 0-65535
EndExtUserPrmData

ExtUserPrmData = 5 "Data Output 1(VFD -> PD-01)"
Unsigned16 0x2101 0-65535
EndExtUserPrmData

ExtUserPrmData = 6 "Data Output 2"
Unsigned16 0x2102 0-65535
EndExtUserPrmData

ExtUserPrmData = 7 "Data Output 3"
Unsigned16 0x2103 0-65535
EndExtUserPrmData

ExtUserPrmData = 8 "Data Output 4"
Unsigned16 0x2104 0-65535
EndExtUserPrmData

ExtUserPrmData = 9 "d_state"
Unsigned16 1 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 10 "din_len"
Unsigned16 2 0-4
EndExtUserPrmData

ExtUserPrmData = 11 "dout_len"
Unsigned16 2 0-4
EndExtUserPrmData

ExtUserPrmData = 12 "LossDPComTreat"
Unsigned16 1 0-1
Prm_Text_Ref = 2
EndExtUserPrmData

ExtUserPrmData = 13 "LossSPComTreat"
Unsigned16 0 0-2
Prm_Text_Ref = 3
EndExtUserPrmData

Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(2) = 2
Ext_User_Prm_Data_Ref(4) = 3
Ext_User_Prm_Data_Ref(6) = 4
Ext_User_Prm_Data_Ref(8) = 5
Ext_User_Prm_Data_Ref(10) = 6
Ext_User_Prm_Data_Ref(12) = 7
Ext_User_Prm_Data_Ref(14) = 8
Ext_User_Prm_Data_Ref(16) = 9
Ext_User_Prm_Data_Ref(18) = 10
Ext_User_Prm_Data_Ref(20) = 11
Ext_User_Prm_Data_Ref(22) = 12
Ext_User_Prm_Data_Ref(24) = 13

;============ END of GSD file for VFD Drives =====================